Default U.S. configuration
- Voltage
- 110–120V / 60Hz
- Light source / bulb base
- E26 replaceable LED bulb
- Light source included
- Yes — complete LED bulb set included for the selected configuration
- Color temperature
- 3000K Warm White
- Nominal light output
- 4,200 lm (Large, over 24–36 in)
- Control
- Wall switch control
- Physical mounting
- Flush ceiling mount
- Electrical connection
- Hardwired
- Location
- IP20
The stated nominal light output is the FIFTH & BEAM standard configuration for the selected size. The standard light color is 3000K Warm White. Size, finish and other available choices remain as shown in the selector.
Overhead character
Ceiling lighting can organize a room as much as illuminate it. Glacier Cascade Ceiling Light does that with balanced ceiling-mounted silhouette, standard proportion, and a material story centered on brass, glass.
Use Glacier Cascade Ceiling Light in kitchen & dining, home office, and living room only after checking the complete installation zone. The visible body, mounting hardware, airflow or shade clearance, and access for future service all matter.
What the source confirms
- Product type: Ceiling Light
- Materials: Brass, Glass
- Dimensions: ∅ 25.6″ x H 7.9″; Dia 65cm x H 20cm
- Finish and color: Body Finishes: Brass; Shade Finishes: Clear; Brass & Clear
- Light color: 3000K Warm White
- Mounting: Flush ceiling mount
- Power source: Hardwired
- Bulb base: E26
- Location rating in source: IP20
- U.S. electrical preparation: 110–120V / 60Hz
Available choices
The recorded dimensions for Glacier Cascade Ceiling Light are ∅ 25.6″ x H 7.9″; Dia 65cm x H 20cm. The catalog currently contains 1 purchasable configuration. Available selection data is Size: ∅ 25.6″ x H 7.9″; Color: Brass & Clear. Match every option on the same variant line before ordering; images may show more than one configuration.
- Size: ∅ 25.6″ x H 7.9″
- Color: Brass & Clear
The gallery contains 16 product images. Use images to understand form and finish, but use the written dimensions and selected option values for ordering.
Electrical suitability
Electrical planning for Glacier Cascade Ceiling Light starts with its 110–120V / 60Hz U.S. configuration. The standard U.S. configuration uses Flush ceiling mount and a hardwired electrical connection; lighting details include light source: E26 replaceable LED bulb; color temperature: 3000K Warm White; nominal light output: 4,200 lm (Large, over 24–36 in); control: Wall switch control. Use a qualified electrician to review the selected variant and site conditions before installation.
Factory-backed selection
Behind FIFTH & BEAM is a Zhongshan factory with 20 years in lighting. We assess Glacier Cascade Ceiling Light through a product-specific lens: material transitions, ceiling scale, configuration clarity, and the way its balanced ceiling-mounted silhouette reads after installation.
Questions specific to Glacier Cascade Ceiling Light
What material information is confirmed?
The recorded material list for Glacier Cascade Ceiling Light is Brass, Glass. Finish names describe appearance; they should not be treated as a different structural material unless the selected variant explicitly says so.
What should I know about size and configuration?
The recorded dimensions for Glacier Cascade Ceiling Light are ∅ 25.6″ x H 7.9″; Dia 65cm x H 20cm. The catalog currently contains 1 purchasable configuration. Available selection data is Size: ∅ 25.6″ x H 7.9″; Color: Brass & Clear.
What light-source information is recorded?
For Glacier Cascade Ceiling Light, the recorded lighting data is light source: E26 replaceable LED bulb; color temperature: 3000K Warm White; nominal light output: 4,200 lm (Large, over 24–36 in); control: Wall switch control. Use the standard U.S. configuration above for ordering; contact FIFTH & BEAM only when a custom light output or control package is required.
What’s included
- Fixture body and all shades or diffusers shown for the selected configuration
- A complete set of E26 LED bulbs matched to the selected configuration
- Ceiling mounting hardware
- Installation instructions
The in-wall switch, junction box and site wiring are supplied by the installation site. Use a qualified installer and follow the wattage marking on each socket when replacing a bulb.